Base de conhecimento Tecnologia
¡¡

Connecting Rod: Parts, Types, Functions, Uses, and More
The connecting rod is a connection between the piston and a crankshaft. It joins the piston pin with the crankpin.The small end of the connecting rod is connected to the piston pin and the big end to the crank pin.The purpose of the connecting rod is to convert the linear motion of the piston into the rotary motion of the crankshaft.
Content£º Industry Technology
Date£º 2026-02-23
Editor£º NewCams

Engine Gaskets£ºTypes, Functions, and Signs of Failure
Engine gaskets provide a seal between two surfaces of the engine. Due to their materials and functions, engines are exposed to temperature and pressure changes, and engine parts are subject to movement. As the engine heats and cools, compression and vacuum create pressure that causes engine parts to expand, contract, move apart, and pull together.
Content£º Industry Technology
Date£º 2026-01-07
Editor£º NewCams

Piston and Types of Piston, Definition, Function
A piston is cylindrical in shape and forms the movable portion of the combustion chamber. A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, and pneumatic cylinders among other similar mechanisms. In an engine, it¡¯s purpose is to transfer force from expanding gas in the cylinder to the crankshaft via a piston rod and connecting rod.
Content£º Industry Technology
Date£º 2025-12-20
Editor£º NewCams

Cylinder Block: Diagram, Parts, Types, Functions, & Material
An engine block is a structure that contains cylinders, and other parts of an internal combustion engine. In old engines, the engine block has only the cylinder block, to which a separate crankcase was attached.
Content£º Industry Technology
Date£º 2025-11-01
Editor£º NewCams

Cylinder Head: Diagram, Parts, Functions, Types, Uses
In an engine, the top of the cylinder is closed with a separate cast piece called the cylinder head. The cylinder head is bolted to the upper part of the cylinder block. This joint is covered by a head gasket. It consists of a combustion chamber, spark plugs, and sometimes valves (in the I and F-heads).
Content£º Industry Technology
Date£º 2025-10-26
Editor£º NewCams

Types of V-Engine : Parts, Working, Pros and Cons
A V engine is a type of internal combustion engine. It has two sets of cylinders arranged in a 'V' shape. They are angled between 60 and 90 degrees. They are usually placed over the crankshaft.
Content£º Industry Technology
Date£º 2025-09-16
Editor£º NewCams

What is a 4-stroke engine? Types, Advantages, Disadvantages, Need
A 4-stroke engine is an Internal combustion engine, where four successive strokes (i.e. Suction-Compression-Power-Exhaust) completes in two revolutions of the crankshaft. In recent days the majority of automobile runs on a four-stroke cycle.
Content£º Industry Technology
Date£º 2025-08-06
Editor£º NewCams

Difference Between Petrol and Diesel Engine
Before starting to discuss about the Difference Between Petrol and Diesel Engine let us first understand about both types of engines individually.
Content£º Industry Technology
Date£º 2025-07-27
Editor£º NewCams

12 Main Car Engine Parts You Must Know
In this article, we shall learn about the different parts of car engines. A car engine is the heart of a vehicle that converts fuel into energy to power the vehicle's wheels. Let us first understand the types of engines and the different layouts available to us
Content£º Industry Technology
Date£º 2025-06-23
Editor£º NewCams

Reciprocating Engine: Overview, Types, Parts & Working
A Reciprocating Engine is a classification of the internal combustion engines in which the piston moves up and down. The top portion of the piston where valves are located is called Top dead center, while the opposite extreme down portion of the piston is called Bottom dead center.
Content£º Industry Technology
Date£º 2025-05-12
Editor£º NewCams


Rocker Arm: Diagram, Parts, Function, Material, Uses
This post dives into Rocker Arms, covering Diagram, Parts, Function, Material, Types, Advantages, and Uses with illustrations.
Content£º Industry Technology
Date£º 2025-03-08
Editor£º NewCams


Tappets
Tappets (also known as Lifters / Valve Lifters) are core transmission components in an engine¡¯s valve train.
Content£º Industry Technology
Date£º 2025-02-17
Editor£º NewCams


Mechanical vs Hydraulic Tappets
¡¡
Content£º Industry Technology
Date£º 2025-01-03
Editor£º NewCams


What are Camshaft Lobe Profiles and Patterns?
The camshaft profile refers to the shape of the individual lobes. The camshaft pattern refers how the profile of the intake and exhaust lobes compare to each other.
Content£º Industry Technology
Date£º 2024-12-20
Editor£º NewCams


What is Camshaft Lift?
When someone refers to lift, they could be talking about 2 different things.Valve Lift and Cam Lift
Content£º Industry Technology
Date£º 2024-11-14
Editor£º NewCams


Camshafts and Crankshafts: What Do They Do & How Do They Work?
Camshafts and crankshafts are terms you've probably heard if you've discussed internal combustion engines with your mechanic (or fellow car enthusiasts). But what is a camshaft or a crankshaft, and what do they do?
Content£º Industry Technology
Date£º 2024-10-27
Editor£º NewCams

Camshaft vs Crankshaft ¨C Difference
One notable difference between a Camshaft vs crankshaft is that the camshaft assists to actuate the inlet and exhaust valves, whereas the crankshaft helps to transform the reciprocating action of the piston into rotational motion.
Content£º Industry Technology
Date£º 2024-09-02
Editor£º NewCams


Valve Overlap: Definition, Diagram, Purpose, Advantages, Disadvantages
Without valve overlap, a small amount of exhaust gases will remain in the combustion chamber which will affect the engine's performance and exhaust. Valve overlap promotes better scavenging of the gases in the engine.
Content£º Industry Technology
Date£º 2024-08-23
Editor£º NewCams

Camshaft: Functions, Types, Parts, Diagram, Working
In four-stroke engines, the camshaft is responsible for the timely operation of the valves, helping to perform different processes during the engine cycle. It is driven by the engine crankshaft and sits on top of the engine.
Content£º Industry Technology
Date£º 2024-07-28
Editor£º NewCams


What Are Dual Overhead Cams?
Generally, engines with dual overhead camshafts (DOHC) are higher performance engines, they produce more power, and can run at higher spe­eds.
Content£º Industry Technology
Date£º 2024-05-26
Editor£º NewCams

Camshaft
camshaft, in internal-combustion engines, a rotating shaft with attached disks of irregular shape (the cams), which actuate the intake and exhaust valves of a piston and cylinder.
Content£º Industry Technology
Date£º 2024-04-04
Editor£º NewCams


Understanding Camshafts
In scientific terms, it's all about the area under the curve. Just like that calculus class you wished you didn't have to take (or avoided altogether), the camshaft in your engine is largely based on the same mathematical rules.
Content£º Industry Technology
Date£º 2024-03-26
Editor£º NewCams

How Camshafts Work
The camshaft is critical to the basic function of an engine. Comprised of two distinct parts, the cams and the shaft, the camshaft is the element that enables valves to open. As the shaft rotates, the egg-shaped cams (or "lobes") push the valves open in sync with the crankshaft gear.
Content£º Industry Technology
Date£º 2024-02-11
Editor£º NewCams


What is Camshaft Lobe Separation?
The Lobe Separation Angle (LSA) is the distance between the centerlines of the intake and exhaust lobes on the camshaft. It is measured in degrees of camshaft rotation.
Content£º Industry Technology
Date£º 2024-01-23
Editor£º NewCams


Why would a camshaft wear out or break?
The camshaft itself is rarely to blame when it fails.
Content£º Industry Technology
Date£º 2023-12-03
Editor£º NewCams

Advancing / Retarding a Camshaft
To advance or retard a camshaft is to change the alignment between the camshaft and the crankshaft.
Content£º Industry Technology
Date£º 2023-11-11
Editor£º NewCams

How do I install a new camshaft?
Installing and adjusting (or "degreeing") the camshaft can be tricky.
Content£º Industry Technology
Date£º 2023-10-29
Editor£º NewCams


What is camshaft end play?
End play is how far the camshaft moves in the engine block, from back to front. It is sometimes referred to as how far the cam will "walk."
Content£º Industry Technology
Date£º 2023-09-09
Editor£º NewCams


What is the difference between a flat tappet and a roller camshaft?
Camshafts are classified by the type of lifter they use. The lobes on the cam are machined differently based on the intended lifter. Lifters are sometimes called a "follower" or "tappet." They contact the cam lobe with either a flat surface or a wheel.
Content£º Industry Technology
Date£º 2023-08-15
Editor£º NewCams

How do I break in my roller camshaft and lifters?
Breaking in an enigne with a roller camshaft is important. Metal particles are created during break-in. This is the biggest issue for the bearings in the roller lifter.
Content£º Industry Technology
Date£º 2023-07-21
Editor£º NewCams

How do I break in my flat tappet camshaft and lifters?
Breaking in an engine with a flat tappet camshaft is critical to its performance and long life. This mates the lifters to the cam lobes.
Content£º Industry Technology
Date£º 2023-06-18
Editor£º NewCams


O que faz um eixo de cames?
Ao converter o movimento rotacional em movimento linear, o eixo de cames garante que a entrada de combust¨ªvel e a expulsão do escape ocorram nos momentos certos. Atrav¨¦s da compreensão da função do eixo de cames, ganha-se uma visão sobre a not¨¢vel engenharia que alimenta ve¨ªculos em todo o mundo...
Content£º Industry Technology
Date£º 2023-05-13
Editor£º NewCams


O que ¨¦ um Eixo de cames? | Como funciona um Eixo de cames?
O eixo de cames ¨¦ uma das partes mais importantes do motor de combustão interna que regula a abertura e o fechamento das v¨¢lvulas de entrada e escape...
Content£º Industry Technology
Date£º 2023-04-19
Editor£º NewCams


O que ¨¦ um eixo de equil¨ªbrio
Na engenharia de motores de pistão, um eixo de equil¨ªbrio ¨¦ um eixo ponderado exc¨ºntrico que compensa vibrações em projetos de motores que não são inerentemente balanceados...
Content£º Industry Technology
Date£º 2023-02-29
Editor£º NewCams

O que um eixo de equil¨ªbrio faz: Melhorando a suavidade e o desempenho do motor
um componente que se mostra um ator significativo no refinamento do motor ¨¦ o eixo de equil¨ªbrio. Este engenhoso dispositivo serve para amortecer as vibrações produzidas por um motor durante o seu funcionamento...
Content£º Industry Technology
Date£º 2023-01-15
Editor£º NewCams
¡¡ ¡¡ ¡¡
¡¡

Ligações

Contacto

Bem-vindo
YuHuan NewCams Machinery Manufacture Co.,Ltd.

Completamos cada processo cuidadosamente e fornecemos o melhor serviço para cada ve¨ªculo.

F¨¢brica de fabricação de eixos de cames - NewCams
+86 0576 8727 7300
+86 0576 8725 2600
info@camshaft.cc
Block 18,
ChingFong Industrial Park
Bingang Industrial Zone,
Ganjiang Yuhuan -CP:317610
ZheJiang-China

¡¡

©2026 NewCams Todos os direitos reservados

[ ]NewCams
¡¡
TOP